Adjusting Temperature; Display - Game ready GRPro 2.1 CONTROL UNIT User Manual

To adjust the temperature being applied during treatment, simply turn the temperature
knob towards 3 snowflakes for the maximum amount of cold, or towards 1 snowflake for
the least amount of cold. Notice that as you adjust the knob, the "Target Temperature" on
the display will change. The system will automatically adjust to match the temperature you
have selected.
TIP: The maximum amount of cold is dictated by the amount of ice in the reservoir and
the setting of the temperature adjustment knob. You may need to stir or replenish the ice
to achieve coldest temperatures. Ice will melt faster in the acute phases of injury as the
Game Ready System is removing greater amounts of heat from the treatment site.
Status bar:
Other Icons:
Temperature:
EN- 6

ADJUSTING TEMPERATURE

DISPLAY

Error
Sleep
Battery
Off (Mute)
On
Indicates selected mode.
Indicates unit is paused.
Indicates unit is running.
Indicates an error. See troubleshooting
pages 24-26 for error codes.
Indicates sleep mode time.
Indicates remaining battery capacity.
Actual Temperature: Approximate
temperature of the water leaving the
Control Unit.
Target Temperature: Indicates the
target temperature setting. The Control
Unit will automatically match the Actual
Temperature and Target Temperature as
closely as possible.