Game ready GRPro 2.1 CONTROL UNIT User Manual page 44

Connect the larger end of the
6
Connector Hose (with the red
button) to the Control Unit.
Make sure you hear it click.
To disconnect, simply press
the red button and remove
the connector from the
Control Unit.
Apply the selected Wrap (consult the Use Guide accompanying each Wrap for
7
application instructions). To ensure proper performance of the system, it is important
to use ATX Series Heat Exchangers in your Wrap.
Caution:
•
•
Connect the smaller end of the Connector Hose (with a blue or gray button) to the
8
Wrap. Make sure you hear it click. To disconnect, simply press the blue or gray button
and remove the connector from the Wrap.
If you have any problems with the set-up of your GRPro 2.1 System, in the U.S. call
Game Ready Customer Service at 1.888.426.3732 (+1.510.868.2100); from outside
of the U.S. please contact your local distributor.
Warnings:
•
•
•
EN- 10
The Wrap is not sterile. Do not place directly against open wounds, sores,
rashes, infections, or stitches. The Wrap may be applied over clothing or
dressing.
To ensure best fit, be sure the Wrap is completely deflated prior to each
application.
Disconnect Button
Follow the treatment recommendations of your health care practitioner
for the use of this device.
Improper placement or prolonged use of the GRPro 2.1 could result in tissue
damage.
READ COMPLETE INDICATIONS, CONTRAINDICATIONS, CAUTIONS AND
WARNINGS BEFORE USING THIS PRODUCT!
Disconnect
Button
Connector Hose
to Wrap
Click