Install Arm Mount On Rotary Cutter; Connect Strut To Rotary Cutter; Release Castor Wheels - Schulte FLX-1510 Operator's Manual

Install Arm Mount on Rotary Cutter

Install the arm mount to the rotary cutter using one
¾ X 5 and one ¾ X 6 bolts, washers and locknuts
arranged as illustrated. 3-1" washers are installed at
the threaded end of each bolt in order to prevent the
bolt threads from contacting the frame lugs.

Connect Strut to Rotary Cutter

Set the length of the strut from pivot to pivot center
according to chart below. Bolt the strut assembly to
the mounting lugs on the arm and cutter using two 1
X 4" bolts and locknuts.
Machine
XH1500 Series 3
XH1000 Series 3
FX315
FX310
FX180/FX1800
FX120/FX1200

Release Castor Wheels

Remove the 3/4 X 2-1/2 bolts that lock the castor wheel. The bolts and nuts can be stored in the cutout on the
plate behind the castor wheel pivot.
FLX-1510 06/18
© 2018 Alamo Group Inc.
ASSEMBLY
Strut Length
45-1/4"
44-1/4"
45-1/4"
44-1/4"
45-1/4"
44-1/4"
Assembly Section 3-9