Schulte FLX-1510 Operator's Manual page 77

• Ensure each hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and
are secured with pins.
• Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports. IMPORTANT: DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks. OPS-FLX-0004_A
• Ensure that the mower is equipped and
secured with wing transport locks.
• Check the condition of the wing hinge pins.
• Check the condition of the mower axle
suspension spring.
• Inspect mower tire condition, wheel bearings,
and lug nut torque. OPS-R-0014_I
• Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Make sure that wing lock pins are installed
before approaching a raised wing. Replace
damaged, worn and missing blades as
complete sets to maintain rotary balance.
• Ensure carrier hub nuts are tightened with the
cotter pin inserted and spread.
• Inspect the condition of the deck skid shoes
and the skid shoe attaching hardware.
• Check that the hitch pins are securely in place.
Make sure safety chains are securely wrapped
around the tractor, flex arm and mower. OPS-
FLX-0005_A
FLX-1510 06/18
© 2018 Alamo Group Inc.
OPERATION
Operation Section 4-17