Schulte FLX-1510 Operator's Manual page 93

Stay alert and watch for trees, low hanging limbs,
power lines, and other overhead obstacles and solid
ground objects while you are operating.
to avoid hitting these items
To avoid most obstacles, use the FLEX-ARM
cylinder to steer the cutter. The FLX- 1510 can
swing the cutter 122" using it's hydraulic cylinder.
The tractor may be needed to maneuver around
larger obstacles.
When mowing across uneven areas such as road shoulders, ditch edges, and other uneven terrain, position
mower so that one support wheel is near the highest point to prevent blades from cutting into gravel or dirt
which can cause rapid blade wear and extremely severe shock loads on the drivetrain resulting in rapid wear
or damage to these components. Blades contacting the ground may cause objects to be thrown out from
under the mower deck. Always avoid operating the mower at a height or position which may cause the blades
to contact the ground. Cutting into the berm or edge of the ditch will cause abnormal and accelerated blade
wear and possible blade component failure. OPS-R-0029
FLX-1510 06/18
© 2018 Alamo Group Inc.
OPERATION
Use care
.
Operation Section 4-33