Appendix B: Suggested Torque Limits; Standard Head Markings; Hex Bolts; Other Bolts - Taylor-Dunn SC-090-24 Operation, T Roubleshooting And Replacement Parts Manual

Appendixes

APPENDIX B: SUGGESTED TORQUE LIMITS

HARDWARE IDENTIFICATION

Standard Head Markings

Note: Torque value used should be for lowest grade of hardware used. If a grade 2 nut is used on a
grade 8 bolt, use grade 2 torque value.
Note: Toque values specified are for clean dry threads.

Hex Bolts

S.A.E. Grade 2
S.A.E. Grade 8

Other Bolts

Truss Head, grade 2
Appendixes
Appendix B
Page 4
S.A.E. Grade 5
L'9
The grade of a metric bolt is cast directly on the
head. Below is an example of a 10.9. The location
and style of the text will vary.
Carriage Bolt, grade 2
(unless marked as above)
*Not available at time of printing