Standard Specifications - Taylor-Dunn SC-090-24 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

STANDARD SPECIFICATIONS

ITEM
Occupancy
Dimensions
Turning Radius
Dry Weight
Without Batteries
Min/Max Battery
Weights
Maximum Load
Electrical System
Transmission
Motor, DC
Series Wound
Maximum
Recommended Speed
Brakes
Steering
Tires
Frame
Instrumentation
Charger
This vehicle conforms to requirements for Type E vehicles as described in O.S.H.A. Standard Section
1910.178 (Powered Industrial Trucks) and with all applicable portions of the American National Standard
for Personnel and Burden Carriers (ANSI B56.8).
* - Specifications are subject to change without notice.
Safety Rules
Page 2
SPECIFICATION*
1-Operator
218 L X 75 W X 122.5 H Centimeters
85.75 L X 29.50 X 48.25 H Inches
170 Centimeters (67 inches)
239 kg (528 lbs)
105 kg to 145 kg (232 lbs to 480 lbs)
408 kg (900 lbs)
4-217 Amp Hour, 6 Volt, Lead Acid Batteries,
Solid State Speed Control, 270 Amp
Helical Gear, Oil Bath, Direct Gear Drive
3.35 kW @ 935 rpm, (4.5 hp)
16 kph (10 mph)
Rear Wheel Mechanical Drum, Hand Operated Park Brake
Clover Leaf Steering Wheel
4.80 X 8 Load Range B, Tire Pressure 60 psi max
Steel Unitized Body, Heavy Duty 16 Gauge Steel,
Diamond Plate
Battery Discharge Indicator, Key Switch, Horn Button,
Forward/Reverse Switch, Operator Presence Interlock Switch
1kW, Built-In, Automatic