Standard Specifications - Taylor-Dunn B0-012-10 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

STANDARD SPECIFICATIONS*

ITEM
Occupancy
Dimensions
Turning Radius
Dry Weight
Without Batteries
Min/Max Battery
Weights
Maximum Load
Deck dimensions
Electrical System
Transmission
Motor, DC, Series Wound
Brakes
Steering
Tires
Frame
Instrumentation
Light Accessories
Charger
This vehicle conforms to requirements for Type E vehicles as described in O.S.H.A. Standard Section
1910.178 (Powered Industrial Trucks) and with all applicable portions of the American National Standard for
Personnel and Burden Carriers (ANSI B56.8).
* - Specifications are subject to change without notice.
Safety Rules
Page 2
SPECIFICATION
Driver, 1-passenger
302L x 114W x 122H Centimeters
119L x 45W x 48H Inches
317 Centimeters (125 Inches)
301 kg (665 lbs)
158 kg to 194 kg (348 lbs to 428 lbs)
1088 kg (2,400 lbs)
113.6 W x 188 L Centimeters (44.75W x 74L Inches)
Six 217 Amp Hour, 6 Volt, Lead Acid Batteries,
Solid State Speed Control, 400 Amp
Helical Gear, Oil Bath, Automotive Type Hypoid Differential.
4.47 kW, (6 Horse Power) @ 1,400 RPM
Rear Wheel Hydraulic Disc, Hand Operated Park Brake, 4 Wheel Hydraulic Disc,
Hand Operated Park Brake
Automotive Steering 24:1
5.70 x 8 Load Range B
Steel Unitized Body, Heavy Duty 16 Gauge Steel, Diamond Plate
Battery Status Indicator, Key Switch, Horn Button, Forward/Reverse Switch,
Headlight Switch
Headlight, Dual Tail/Brake Lights
36v DC / 25A, 120v AC / 12A 60Hz