Saving Loss Test Results - Viavi SmartClass OLP-85 Series Operating Manual

OLP-85/OLP-85P
Fig. 15 Result overview over two wavelengths

Saving Loss test results

Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project "default", which is always present (see
"Managing Projects" on page 35).
Results are stored simply by pressing the
key is pressed, the result just displayed will be saved.
To save current results:
The instrument is in application mode and displays the test
I
results (overview or details) to be stored.
[G]
1. Press the key.
The Save dialog is displayed.
As file name the label prefix defined in the project settings is
showed on top of the display.
2
4
7 M L S
EASURING OSS WITH
S
AVING
[G]
key. Each time the
1
3
/P
OURCE OWERMETER
L
OSS TEST RESULTS
47