Viavi SmartClass OLP-85 Series Operating Manual page 17

NOTE:
OLP-85/OLP-85P
Power supply
The following power sources can be used to operate the OLP-85:
• Eight 1.5 V dry batteries
(Mignon AA size, alkaline type recommended)
• Eight 1.2 V NiMH rechargeable batteries
(Mignon AA size, no internal charge)
• PS4 Universal AC/DC Power Supply (optional)
• RBP2 Li-Ion Battery Pack (optional)
Best Measurement accuracy is achieved when the measurements
are performed in battery mode (w/o AC adapter).
Battery operation
WARNING
Dangers when handling batteries
Handling batteries may be dangerous. Please note the fol-
lowing safety instructions.
Please note the battery operation safety information in the
J
chapter "Battery operation" on page
Replacing batteries
Do not replace individual batteries. Always change all eight
J
batteries at the same time.
Always use eight batteries of the same type; i.e. do not mix
J
rechargeable and non-rechargeable batteries.
3 G S
ETTING TARTED
U
NPACKING THE INSTRUMENT
11.
17