Viavi SmartClass OLP-85 Series Operating Manual page 48

7 M L
EASURING OSS WITH
S L
AVING OSS TEST RESULTS
NOTE:
NOTE:
48
S /P
OURCE OWERMETER
1 Defined label name.
Tap field to edit label name.
J
2 • Probe: Number of already saved probe results.
• Powermeter: Number of already saved powermeter results.
• PCM: Number of already saved PCM results.
3 Decrease / increase label ID
4 Save results
2. To edit the label name, tap the field, edit the name and tap
[OK].
3. To change the ID, tap [Decrement
[G]
4. Press the key again or tap the
The measurement is stored in the current active project.
When measuring two wavelengths at a time both wavelengths
are stored separately. Thus, the ID is incremented by 2.
If the label/fiber ID is not changed, the data set will be saved
under the same title. Then the Data can be distinguished and
sorted by the Timestamp.
ID] or [Increment ID].
[Save] button.
OLP-85/OLP-85P