Viavi SmartClass OLP-85 Series Operating Manual page 60

9 D M
ATA ANAGEMENT
D P
ATA MANAGEMENT OF OWERMETER TESTS
NOTE:
60
Measurement Data of Powermeter Test
Fiber ID
 [nm]
Pow [dBm]
Pow [Watt]
Pow [dB]
Ref [dBm]
Pass/Fail
Limit [dBm]
Auto

Tone
Timestamp
Managing test results
To select/deselect a test result:
There are several ways to select and deselect test results:
1. Tap an entry once to highlight it, tap it again to select it.
2. Use the up/down arrows to highlight an entry and press the
center key to select it.
[A]
3. Press the key and tap the [Select All]button to select all.
[A]
4. Press the key and tap the [Deselect
all.
The selection state of the highlighted entry toggles. The check
mark in the first column shows in light grey when an entry is
deselected and in dark grey when it is selected.
To view test results in full screen:
The measurement data overview is displayed.
I
1. Select one or more test results from the list.
[A]
2. Press the key and tap the [View
The first selected result will be displayed.
Test label name
Wavelength
measured Powermeter value
Reference value
Passed/failed label
Limit value
 mode
optional Auto
Tone value
Time and date of the test
Selected]
All] button to deselect
button.
OLP-85/OLP-85P