Viavi SmartClass OLP-85 Series Operating Manual page 55

NOTE:
OLP-85/OLP-85P
To return to a Live image, press the QuickCapture™ key or press
[A]
the key and tap the
and a test result simultaneously.
If the test has been passed, the image has a green colored frame.
If failed, the frame is red.
Fig. 19 Pass/Fail analysis – overlay view
Magnification Control
The Magnification Control allows you to modify the live display
from high to low magnification and vice-versa. In the high
magnification mode an automatic centering is available.
Picture selected: Live
Test Allows you to launch a (new) test of the connector
(see "Launching a test of the connector and fiber
end-face" on page
Freeze Allows you to freeze the live image and to save it
later on the disk. Once this key is pressed, the freeze
image is automatically set to position 2.
Picture selected: Test
Save allows you to save the selected picture in the currently
selected group in the disk of the instrument. Press the
enter a name for the JPG file, and validate.
Overlay allows you to display or hide the limits of each zone and
the defaults on image from a test result.
Magnification Control allows you to switch all the images from
Digital Probe test results from high to low magnification and
vice-versa.
Saving the test result in a JPG file
Once the test has been performed and the result is displayed on
the OLP-85 screen:
8 P
C
ONFIGURING THE
[Live] button to view both the live image
53)
/PCM O
ROBE PERATION
D P
IGITAL ROBE
[G]
key,
55