Table of Contents
Advertisement
7 L
T
O
OSS
EST
PERATION
S
L
AVING
OSS TEST RESULTS
70
Saving Loss test results
Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project "default", which is always present (see
"Managing projects" on page
Results are stored simply by pressing the
key is pressed, the result just displayed will be saved.
To save current results:
The instrument is in application mode and displays the test
I
results (overview or details) to be stored.
[G]
1.
Press the
key.
The Save dialog is displayed.
As file name the label prefix defined in the project settings is
showed on top of the display.
2
4
1
Defined label name.
Tap field to edit label name.
J
2
• Probe: Number of already saved probe results.
• Powermeter: Number of already saved powermeter results.
• PCM: Number of already saved PCM results.
• Loss/Length: Number of already saved loss/length results.
• Loss: Number of already saved loss results.
3
Decrease / increase label ID
4
Save results
2.
To edit the label name, tap the field, edit the name and tap
[OK].
3.
To change the ID, tap [Decrement
42).
[G]
key. Each time the
1
2
3
ID]
or [Increment ID].
OLTS-85/OLTS-85P
Advertisement
Table of Contents
