6 P
O
OWERMETER
PERATION
S
ETTING AND SELECTING WAVELENGTHS
NOTE:
40
To delete a wavelength:
The Edit Table menu in Powermeter mode is displayed.
I
1.
Select the desired wavelength.
[A]
2.
Press the
key and tap the [Delete
To edit the reference value:
The Edit Table menu in Powermeter mode is displayed.
I
1.
Select the desired wavelength.
[A]
2.
Press the
key and tap the [Edit
3.
Type in the desired value.
4.
Tap the
[OK]
button.
To edit the Pass/Fail limit for value:
The Edit Table menu in Powermeter mode is displayed.
I
1.
Select the desired wavelength.
[A]
2.
Press the
key and tap the [Edit
3.
Type in the desired value.
4.
Tap the
[OK]
button.
To show or hide wavelengths:
A wavelength with a checkmark can be selected by taping the
wavelength field on the measurement display. The wavelengths
shown in the table accessed by the
not affected by the settings.
The Edit Table menu in Powermeter mode is displayed.
I
1.
Select the desired wavelength.
2.
To set/remove the checkmark, press the center key within the
arrow keys.
– or –
Tap the desired wavelength.
Selecting a wavelength from the table
The instrument is in Powermeter mode.
I
Tap the lower left side of the touchscreen until the desired
J
wavelength is displayed.
If you miss a wavelength you have to add it to the table or
enable the Show option.
– or –
[A]
Press the
key, tap the
button.
Reference]
Limit]
button.
[A]
[A]
menu (
[
button and tap a wavelength.
OLP-85/OLP-85P
button.
> ) are