G&G IMAGE M4100 Series User Manual page 93

5) Click on "Adjust the Scanned Image Quality" on the bottom left corner of the above picture, the
advanced properties interface will pop up, then users can set the scan; After finishing the settings,
click on the "OK" button, then "Scan" button to start scan.
2. Photoshop
Operation Steps:
1) Launch Photoshop, click "File"- "Import" on the top left conrner and select WIA Scan, as is
shown below:
2) After the window pops up, please refer to Step 4 and Step 5 of 9.1.3.1 to see the specific
operation steps.
82