Wireless Setup; Machine Setup - G&G IMAGE M4100 Series User Manual

The printer supports using the following IPv6 addresses for network printing and
Note：
management(please refer to
• IPv6 local-link address: local IPv6 address set up by oneself (addresses beginning
with FE80).
• Stateful address: IPv6 address set up by DHCPv6 server (if there is no DHCPv6
server in network, the "Stateful Address" cannot be assigned).
• Stateless address: IPv6 address set up by network router automatically.

6.2.2. Wireless setup

You can set up the wireless network, wireless IP setup, Wi-Fi Direct and WPS via wireless setup
page. Before setup, please log in the embedded Web server (please refer to
method).
6.2.2.1. Wireless network
1. Click "Settings" – "Network settings" – "Wireless setup" – "Wireless Network".
1) If you need to set up wireless network, please click the SSID of access point (wireless router)
in search list, input secret key and click "Apply".
6.2.2.2. Wireless IP setup
Only when the wireless network of printer is turned on, the Wireless IP Configuration can be
displayed on Web server.
1. Click "Settings" – "Network settings" – "Wireless setup" – "Wireless IP Configuration".
1) DHCPv4 is ticked by default. If IP address needs to be set up manually, please cancel the
DHCPv4 checkbox ticked and input the "IPv4 Address", "Subnet Mask" and "Gateway Address"
that you need to set up and then click "Apply".
6.2.2.3. WPS setup
1. Click "Settings" – "Network settings" – "Wireless setup" – "WPS".
1) Select the "WPS Startup Method" you need, and then click "Apply" and operate according to
page prompt.
6.2.2.4. Wi-Fi Direct setup
1. Click "Settings" – "Network settings" – "Wireless setup" – "Wi-Fi Direct".
• If Auto selected, the mobile terminal will realize automatic connection upon initiating
Note：
the connection invitation without the need of confirmation on panel.
• If Manual selected, the mobile terminal cannot realize connection until initiating the
connection invitation prior to confirmation on panel.

6.2.3. Machine setup

You can add mail address contacts, set up e-mail notification, set up sleep time and recover
factory settings via machine setup page.
6.2.3.1. Set up e-mail notification
If you set up e-mail notification, an e-mail will be sent to the mail address specified by you when
abnormality such as paper out occurs. You can receive emails only if you made correct email
setup. Please consult your network administrator for detailed setup steps. You need to log in the
embedded Web server before setting up email notification (please refer to
method).
Chapter 12.4 and print "NetConf Pg" view IPv6 address).
Chapter 6.1 for login
Chapter 6.1 for login
56