Scan To U Disk; Cancel Scan Job - G&G IMAGE M4100 Series User Manual

9.3.4. Scan to U disk

This printer supports scanning files to USB without a computer. Before operation, please make
sure the USB has enough storage space. The specific operation steps are as follow:
1. Insert the USB into the printer's front USB interface.
2. Put an original on the glass platen or into the ADF (please see
original).
3.Press "Scan" button on the control panel, and press "▲" or "▼" to select " Single Page Scan" or
" Merge Scan", then press "OK" button.
4. Press "Menu" and then "OK" to enter the "Scan Setting" interface.
5. Press "▲" or "▼" to select "Scan To" options; then, press OK.
6. Press "▲" or "▼" to select "Scan to USB" and then press "OK"; press "Start" to begin
scanning.
7. For merge scan, please put files to be scanned on the glass platen and then press "Start" to
scan the next page (directly continuous scanning is available if scanning with the ADF).
The printer will create a folder named GG IMAGEScan in which all scanned files are saved in
PDF or JPG.
Note: • USB formats supported: FAT and FAT32 for Windows system and MS-DOS (FAT) for
macOS system.

9.4. Cancel Scan Job

During the scanning, two ways are available to cancel the job:
1. Press "Cancel" button on the control panel to cancel the job.
2. Click Cancel button on the scan progress bar interface of the computer to cancel the job.
Chapter 2.5 for how to put an
91