Print Settings; Cancel Printing; Printing Mode; Printing With The Automatic Feeder Tray - G&G IMAGE M4100 Series User Manual

7.2. Print Settings

You can set up printing parameters with the following two methods before sending printing work
(such as paper type, paper size and paper source).
Operating system Temporary printing setup change
1. Click "File" menu – "Print" – "Select
printer" - "Printer properties" (the detailed
Windows 7
steps may differ because of multiple
operating systems).
1. Click "File" menu – "Print".
macOS
2. Change setup in the window popping
out.
Note：
• Priority of App setup is senior to printer setup.

7.3. Cancel printing

If you want to cancel the operation during printing, please press "Cancel" key on the printer's
control panel.

7.4. Printing Mode

The printer can print with auto feed tray and manual feed tray. The defaulted state is auto
selection, and if there is printing medium in the manual feed box, papers in manual feed tray will
be used with priority.

7.4.1. Printing with the Automatic Feeder Tray

Before printing, please make sure mediums of corresponding quantity have been installed inside
the auto feed tray, and there is no printing medium in the manual feed tray.
Note：
• For precautions on loading paper, see
• For the type of media to be printed with the automatic feeder tray, see
Permanent default setup change
1. Click "Start" menu- "Control Panel" –
"Devices and Printers".
2. Right click on the printer icon, select
"Printing preference" and then change
setup and save it.
1. Click "File" menu – "Print".
2. Change setup in the window popping
out and click to save the preset. (Select
preset every time before printing, or print
according to default setup.)
Chapter 2.
Chapter 2.1.
61