Error Message - G&G IMAGE M4100 Series User Manual

14.3. Error Message

Error Message
No Laser Toner Cartridge
Detected
Toner Low (this prompt is
displayed together with the
standby picture
alternately.)
As the toner is low, it is not
available to accept the
printing job (this prompt is
displayed together with the
standby picture
alternately.)
Toner cartridge life expired. The toner in cartridge runs out.
Feed jam
Printer paper jam
Scanner is Busy
Scan failed
No paper in ADF
Cause
The laser toner cartridge is
installed incorrectly or laser toner
cartridge is damaged.
The toner in cartridge runs low.
If the toner in cartridge runs low,
the printing of fax job received
cannot be executed. (Normal in fax
sending, file printing, copying and
scanning.)
The print paper is loaded
incorrectly. The paper is outside of
the specification range.
The print paper is loaded
incorrectly.
With other scan jobs.
Scanner internal failure.
If you have selected ADF as the
scan source, this message
appears when you start a copy or
scan job without loading paper in
the ADF.
Measure
The laser toner cartridge is
installed correctly or new laser
toner cartridge is replaced.
Please replace with a new
toner cartridge.
Please replace with a new
toner cartridge or find out the "
Low in Toner, Continue to
Print" option among the fax
receiving setting options and
then set it as "On" for
continuous printing.
(Note: once the printer detects
that the toner in cartridge
doesn't run low during booting
or opening and closing its
cover, it will set the "Low in
Toner, Continue to Print"
option enabled before by user
back to "Off".)
Please replace with a new
toner cartridge.
Please correctly load the print
paper.
Please correctly load the print
paper.
Please cancel the current
scan job or wait for the
completion of other scan jobs.
Please contact GG IMAGE
Customer Service.
Please put in the original
properly.
125