Function Of Status Indicator - G&G IMAGE M4100 Series User Manual

Note: • It may not allow to input all special characters above mentioned in different input
environments.
a. Input of fax/phone number. It supports only inputting with 0-9 number keys and the "*"
and "#" keys. In addition, it is available to input spaces with the Down key and the
symbol "-" with the Redial/Pause key.
b. Mixed input of letters, numbers and symbols. It is only allowed to input with 0-9
number keys and the "*" and "#" keys. Specific corresponding characters are different
according to the difference of input environments. (Under this condition, pressing the
Down key could make the cursor move backward; the symbol "-" could not be input with
the Redial/Pause key.)
• When inputting a number or name, short pressing Cancel could clear the last number
or character; while to clear all numbers or characters, please long press it. You may also
use the Up key to clear the last number or character.

1.6. Function of status indicator

The meanings of status displayed by the status indicator are as below:
Status
displayed by
No.
the status
indicator
1
2
3
4
5
Status
Die out
Green indicator normally
on
Green indicator blinks
Orange indicator blinks
Red indicator normally
on
Status Description
Shutdown or sleep state
Printer is ready
Operative modes of Print, Copy, Scan, Fax and
others
Low toner warning
• Toner cartridge error (uninstalled ink cartridge,
unmatching ink cartridge, invalid toner cartridge)
• Drum unit error (the drum units are not installed,
not compatible or come to the end of their service
lives.)
• Paper error (a paper out, paper jam or feed
failure occurs)
• Scan error (a scanning failure occurs, and the
ADF has an open cover or a paper jam.)
• Fax error or printer error such as the front cover
of the printer is open.
9