G&G IMAGE M4100 Series User Manual page 60

• If you do not know the SSID of access point (wireless router), please click "Print Wireless
Note：
Network Information Page" to view the SSID of the needed access point (wireless router).
• If the printer cannot be used normally after wireless network setup is finished, please
install the drive again.
3. Use WPS connection.
Select "No, I don't have a USB cable" in the interface below and then click "Next".
1) Use WPS method to perform steps below to start wireless network on printer. (Please refer to
Chapter 5.1.2 for detailed WPS configuration)
49