Product View - G&G IMAGE M4100 Series User Manual

1.3. Product View

Side view
Cover of automatic
1
document feeder
Feed tray of automatic
2
document feeder
Exit tray of automatic
3
document feeder
4 Cover of scanner
5 Output Bin
6 Front USB interface
7 Control Panel
8 Glass Platen
9 Output Tray
10 Front Cover
11 Manual feed tray
12 Power switch
This is used to remove the paper jammed in scanning for the
ADF.
This is used to place originals scanned from the ADF.
Prevent originals scanned from falling off.
Open the cover of scanner to place the scanned originals on its
glass plate.
For storing the printed paper.
This is used to scan to an U-disk without a computer.
Indicate printer status to conduct set operation.
This is used to place originals scanned from platen.
To prevent the printed paper from falling.
To open the front cover to take out the laser toner cartridge.
For placing mediums that are printed in manual feed tray.
Turn the power on or off and press this button under Ready state
3