Copying; Copying Function; Copying Method; Copying Cancel - G&G IMAGE M4100 Series User Manual

8. Copying

8.1. Copying function

Copy
Multipage
Clone
Poster
Collated copy
Common copying Duplex copying
Image quality
Intensity
Resizing
Paper setting
Arrangement mode
ID card copying Intensity
Paper Size
Intensity
Receipt copying
Paper Size

8.2. Copying method

1. Press "copying key"/"ID card copying key"/"receipt copying key" on control panel.
2. Put an original into the ADF with its front upward (only for plain copying) or on the glass platen
with its front downward. (For how to put an original, please see
3. Set copying quantity with "direction or number key" according to types (99pieces at maximum).
4. Press "Startup key" for copying.
5. If the original is put on the glass platen, the printer will give a prompt of "Scan the Next Page"
after scanning one page. If the next page exists, please remove the original scanned and put the
next page on the glass platen; then, press "Start". After all pages have been scanned, please
press "OK".

8.3. Copying cancel

Press "cancel key" on control panel if canceling copying.

8.4. Common copying setting

Change relevant setting with "copying setting menu" for better copying effect.
1. Press "Copy" and then "Menu" on control panel to enter the "Menu Setting" interface.
2. Press "OK" to enter the "Copy Setting" interface.
3. Press "direction key to select option to be set and press "OK key" to set option.
Instructions
Print a multi-page document to a piece of paper.
Print several identical images to a piece of paper.
Print a one-page original to pieces of paper.
Collate copies of an original.
It supports manual duplex copying for originals.
Set the definition mode to improve the copying effect.
Adjust deep-light copying effect by setting intensity.
Reduce or enlarge the size of image copied.
Set the paper size and paper type.
Set the arrangement mode of ID card to be copied.
Adjust deep-light copying effect by setting intensity.
Set the paper size.
Adjust deep-light copying effect by setting intensity.
Set the paper size.
Chapter 2.5.)
70