G&G IMAGE M4100 Series User Manual page 106

5) After all scanning complete, activate the fax to send.
Note: • In order to prevent damage to this product, do not use a manuscript with correction
tape, correction fluid, paper clips or staples on it. In addition, do not load photos, small
manuscripts or brittle manuscripts into the automatic document feeder.
10.3.1.2. Manual fax sending
1. Put an original on the glass platen or into the ADF (please see
original).
2. Press the Fax button and use the number buttons to enter the Fax number.
3. Press "Speaker" or pick up the receiver to input the fax number.
4. After hearing the fax prompt, press "Start" to confirm sending.
• If the party called receives the call, you may have a voice communication; after confirming the
fax sending and hearing the fax prompt, press "Start" to begin sending.
Chapter 2.5 for how to put an
95