Control Panel; Overview Of Control Panel - G&G IMAGE M4100 Series User Manual

1.5. Control Panel

1.5.1. Overview of control panel

The layout of the printer control panel is shown below:
Control panel without the fax feature
No. Name Functions
LCD
1 Display operation interface and product information.
Display
2 Copy Button Press this button to enter into copy mode.
3 Scan Button Press this button to enter into scan mode.
ID Card
4 Press this button to enter into ID Card Copy mode.
Copy Button
Short press Wi-Fi button to turn on direct Wi-Fi connection of the printer and
automatically print out "Mobile Device Wi-Fi Connection Wizard" page (for
models with Wi-Fi function only).
5 Wi-Fi button Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not connected or
to disconnect Wi-Fi when it has already been connected (for models with Wi-Fi
function only).
Open save toner function(applicable to non-Wi-Fi model only).
Bill Copy
6 Press this button to enter into Bill Copy mode.
Button
Execute cancel operation
7 Cancel
Idle state interface under copy mode, to reset the "Number of Copies" to 01.
This is used to start relevant operations after finishing operation settings.
8 Start Button
In case of a feed failure, please press this key for pick-up and printing again.
9 Menu Open the main menu of control panel
6