Print Information Report; Residual Amount Of Toner - G&G IMAGE M4100 Series User Manual

12.4. Print information report

You can print information report by operating control panel. These pages can help you to learn
about product information, and diagnose and solve product failures.
1. Press "Menu" to enter the menu setting interface.
2. Press "▲" or "▼" to select "Info.report".
3. Press "OK" key to enter information report print. You can print product report according to
needs.
Product reports that could be printed include Demo page, information page, menu structure page,
network configuration, e-mail address, group e-mail, FTP address and Wi-Fi hotspot.
Note: • The product report above is the most complete version, and may be different from
the product report of model that you actually use.

12.5. Residual amount of toner

You may check the current residual amount of toner in cartridge with the printer's control panel.
1. Press "Menu" to enter the menu setting interface.
2. Press "▲" or "▼" to select "TonerRemainder".
3. Press "OK" to enter and check the residual amount.
106