G&G IMAGE M4100 Series User Manual page 69

II. Set the e-mail group
1. Log in the embedded Web server (please refer to
2. Click "Settings", "Machine Settings" and then "E-mail Group" to enter the setting interface of
e-mail group.
3. Click "Create" to pop out a window as below and edit the group name and check the e-mail
address to be added in the contact name (e-mail address) listbox, and then click "Apply".
6.2.3.3. Configure the FTP address book
If you want to scan a file to the FTP server, you need to configure the FTP address book
first.When scanning, you may send the image scanned to the FTP server.Before configuring the
FTP address book, you may need to ask your network administrator for the server IP address,
port number, login name, password and server name.
1. Log in the embedded Web server (please refer to
2. Click "Settings", "Machine Settings" and then "FTP Address Book" to enter the setting interface
of FTP address book.
3. Click "Create" to pop out a window as below and set relevant parameters; after settings
completed, and then click "Apply".
Chapter 6.1 for login method).
Chapter 6.1 for login method).
58