G&G IMAGE M4100 Series User Manual page 143

The dialing fails to be done
The printer is poor in transmitting
Fax sending fault files
A prompt of "Communication
Failure" appears in printing the fax
confirmation report
• Please check the connection of power
cable.
• Please check the connection of telephone
line.
• Change the (audio/pulse) settings. Please
set in the fax sending menu with the dialing
way supported for telephone line.
• Make one copy of original to check if the
fax scanner could work normally.
• Transmit with a higher resolution.
• The telephone line may suffer from
temporary noise or electrostatic
interference. Please send the fax again.
• Please try to set as VoIP in compatibility
and then send again. (Please see
10.3.3 for compatibility setting.)
If the problem still occurs, please check the
telephone line.
Chapter
132