Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Changing LAN IPv4 Address
This configuration step is available for the Access point, Repeater, and Client modes.
1. Select the Automatic obtainment of IPv4 address to let the device automatically
obtain the LAN IPv4 address.
If you want to manually assign the LAN IPv4 address for DAP-300P, do not select the Automatic
obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, Hostname
fields and, if needed, the Gateway IP address field. Make sure that the assigned address does not
coincide with the LAN IPv4 address of the router to which your device connects.
!
If the LAN IPv4 address of DAP-300P was changed, it may be necessary to change your
PC's NIС settings .
2. Click the NEXT button to continue or click the BACK button to return to the previous page.
Figure 41. The page for
Page 48 of 175
changing the LAN IPv4
Configuring via Web-based Interface
address.
Advertisement
Table of Contents
