Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Selecting Operation Mode
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure the LAN port to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the Device mode page, from the Connection method list, select the Wired
connection value. Then from the Work mode list select the Access point value. In this mode
you can change the LAN IP address, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The Router mode.
Figure 37. Selecting an operation mode. The Access point mode.
Page 45 of 175
Configuring via Web-based Interface
Advertisement
Table of Contents
