Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
Changing LAN IPv4 Address
This configuration step is available for the Access point, Repeater, WDS, and Client modes.
1. Select the Automatic obtainment of IPv4 address to let DAP-1360U automatically
obtain the LAN IPv4 address.
2. In the Hostname field, you should specify a domain name of the access point using which
you can access the web-based interface after finishing the Wizard. Enter a new domain name
of the access point ending with .local or leave the value suggested by the access point.
!
In order to access the web-based interface using the domain name, i n the address bar of the
web browser, enter the name of the access point with a dot at the end.
If you want to manually assign the LAN IPv4 address for DAP-1360U, do not select the
Automatic obtainment of IPv4 address checkbox and fill in the IP address, Netmask,
Hostname fields and, if needed, the Gateway IP address field. Make sure that the assigned
address does not coincide with the LAN IPv4 address of the router to which your device connects.
3. After changing the LAN IPv4 address of the device, make sure that the network adapter
settings correspond to the new parameters.
4. Click the NEXT button to continue or click the BACK button to return to the previous page.
Figure 30. The page for
Page 36 of 158
Configuring via Web-based Interface
changing the LAN IPv4
address.
Advertisement
Table of Contents
