Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Figure 74. The page for creating a new Static IPv4 connection. The Authorization via 802.1x Protocol
Parameter
Enable authorization
via 802.1x protocol
Authentication
method
Username
Password
section.
Authorization via 802.1x Protocol
Move the switch to the right to allow authorization in the ISP's
network via the 802.1x protocol.
Select a needed authentication method from the drop-down list.
Enter the username provided by your ISP.
Enter the password provided by your ISP.
Page 83 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
