Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Connecting to Mobile Device with D-Link Assistant Application
1. Connect the power adapter (not included in the delivery package) to the power connector
port on the back panel of the access point, then plug the power adapter into an electrical
outlet or power strip.
2. Make sure that the Wi-Fi connection on your mobile device is on. To switch it on, go to the
mobile device settings.
3. In the list of available wireless networks on your mobile device, select the wireless network
DAP-300P.
4. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) as the password and connect to the wireless network of DAP-
300P.
5. In the settings of the wireless network DAP-300P on your mobile device, in the IP
Settings field, select the Static value (for Android) or the Manual value (for iOS).
6. Enter the value 192.168.0.51 in the IP address field. For iOS devices, also specify the
subnet mask 255.255.255.0. Confirm the changed settings.
7. Launch D-Link Assistant application on your mobile device. The application is available for
Android and iPhone smartphones in AppStore and Google Play.
D-Link Assistant for Android
1 Field names may vary in different versions of operating systems on mobile devices.
D-Link Assistant for iOS
Page 15 of 175
Installation and Connection
1
Advertisement
Table of Contents
