D-Link DAP-300P Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DAP-300P
  6. Quick installation manual

D-Link DAP-300P Quick Installation Manual

Wireless n300 poe access point / router
Hide thumbs Also See for DAP-300P:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Installation Guide
DAP-300P
Wireless N300 PoE Access Point / Router

Advertisement

Table of Contents
loading

Related Manuals for D-Link DAP-300P

Summary of Contents for D-Link DAP-300P

  • Page 1 Quick Installation Guide DAP-300P Wireless N300 PoE Access Point / Router...

  • Page 2: Before You Begin

    If any of the items are missing, please contact your reseller. The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.

  • Page 3: Default Settings

    DAP-300P Quick Installation Guide Default Settings IP address of device 192.168.0.50 admin Username (login) admin Password Name of wireless network (SSID) DAP-300P see WPS PIN on the barcode Network key (PSK password) label on the bottom panel of the device...

  • Page 4: System Requirements And Equipment

    DAP-300P Quick Installation Guide System Requirements and Equipment • An Android or iPhone mobile device (smartphone or tablet) or a computer with any operating system that supports a web browser. • A PC web browser to access the web-based interface: ◦...
  • Page 5 DAP-300P. 5. In the settings of the wireless network DAP-300P on your mobile device, in the IP Settings field, select the Static value (for Android) or the Manual value (for iOS).
  • Page 6 DAP-300P Quick Installation Guide 7. Launch D-Link Assistant application on your mobile device. The application is available for Android and iPhone smartphones in AppStore and Google Play. D-Link Assistant for D-Link Assistant for iOS Android 8. In the application menu, in the Connection method section select the...
  • Page 7 11. Make sure that the application correctly identified the access point to which you connect, and click the Open button to configure all needed parameters of DAP-300P. You can go through the Initial Configuration Wizard or finish the Wizard earlier and go the configuration menu.
  • Page 8 When DAP-300P is accessed with the application the next time and after, the authorization page opens. Enter the username (admin) and the password you...

  • Page 9: Pc With Ethernet Adapter

    DAP-300P Quick Installation Guide PC with Ethernet Adapter 1. Сonnect an Ethernet cable between the LAN port of the access point and the Ethernet port of your PC. 2. For a switch supporting PoE: connect an Ethernet cable between the PoE-enabled switch and the WAN port of the access point.
  • Page 10 DAP-300P Quick Installation Guide Configuring IP Address in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
  • Page 11 Click the OK button. 7. Click the OK button in the connection properties window. Now you can connect to the web-based interface of DAP-300P for configuring all needed parameters. To gain access to an external network (to the Internet),...
  • Page 12 DAP-300P Quick Installation Guide Configuring IP Address in OS Windows 10 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section. 3. In the Change your network settings section, select the Change adapter options line.
  • Page 13 Click the OK button. 7. Click the Close button in the connection properties window. Now you can connect to the web-based interface of DAP-300P for configuring all needed parameters. To gain access to an external network (to the Internet),...

  • Page 14: Pc With Wi-Fi Adapter

    DAP-300P Quick Installation Guide PC with Wi-Fi Adapter 1. For a switch supporting PoE: connect an Ethernet cable between the PoE-enabled switch and the WAN port of the access point. 2. For a switch not supporting PoE or router: connect an Ethernet cable between the switch or router and any Ethernet port of the access point.

  • Page 15: Configuring Wi-Fi Adapter In Os Windows 7

    DAP-300P Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
  • Page 16 DAP-300P Quick Installation Guide 6. Select the Use the following IP address radio button and enter the value 192.168.0.51 in the IP address field. The Subnet mask field will be filled in automatically. Click the OK button. 7. Click the OK button in the connection properties window.
  • Page 17 11. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale. Now you can connect to the web-based interface of DAP-300P for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
  • Page 18 DAP-300P Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 10 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section. 3. In the Change your network settings section, select the Change adapter options line.
  • Page 19 9. In the opened window, in the list of available wireless networks, select the wireless network DAP-300P and click the Connect button. 10. In the opened window, enter the network key (see WPS PIN on the barcode label on the bottom panel of the device) in the Security key field and click the Next button.
  • Page 20 DAP-300P Quick Installation Guide Now you can connect to the web-based interface of DAP-300P for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.

  • Page 21: Connecting To Web-Based Interface

    DAP-300P Quick Installation Guide CONFIGURING ACCESS POINT Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the IP address of the access point (by default, the following IP address is specified: 192.168.0.50). Press the Enter key.
  • Page 22 DAP-300P Quick Installation Guide If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
  • Page 23 DAP-300P Quick Installation Guide The Summary page displays general information on the access point and its software. The web-based interface of the access point is bilingual (English/Russian). You can select the needed language upon the initial configuration of the web- based interface of the access point or in the System / Configuration section of the menu.

  • Page 24: Initial Configuration Wizard

    Click the OK button and wait until the factory default settings are restored. If you perform initial configuration of the access point via Wi-Fi connection, please make sure that you are connected to the wireless network of DAP-300P (see the WLAN name (SSID) in the Default Settings section, page 3) and click the NEXT button.
  • Page 25 DAP-300P Quick Installation Guide 1. Click YES in order to leave the current language of the web-based interface or click NO to select the other language. 2. On the next page, click the CONTINUE button.

  • Page 26: Selecting Operation Mode

    DAP-300P Quick Installation Guide Selecting Operation Mode In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Wired connection value. Then from the Work mode list select the Router value. In this mode you can...
  • Page 27 DAP-300P Quick Installation Guide In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the Connection method list, select the Wi-Fi value. Then from the Work mode list select the WISP Repeater value. In this...

  • Page 28: Changing Lan Ipv4 Address

    1. Select the Automatic obtainment of IPv4 address to let the device automatically obtain the LAN IPv4 address. If you want to manually assign the LAN IPv4 address for DAP-300P, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, Hostname fields and, if needed, the Gateway IP address field.
  • Page 29 DAP-300P Quick Installation Guide Wi-Fi Client This configuration step is available for the WISP Repeater, Repeater, and Client modes. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.

  • Page 30: Configuring Wan Connection

    DAP-300P Quick Installation Guide Configuring WAN Connection This configuration step is available for the Router and WISP Repeater modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection.
  • Page 31 DAP-300P Quick Installation Guide PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access): Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
  • Page 32 DAP-300P Quick Installation Guide PPTP + Dynamic IP or L2TP + Dynamic IP: Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
  • Page 33 DAP-300P Quick Installation Guide 2. If your ISP uses MAC address binding, select the Clone MAC address of your device checkbox. 3. If the Internet access is provided via a VLAN channel, select the Use VLAN checkbox and fill in the VLAN ID field.

  • Page 34: Configuring Wireless Network

    DAP-300P Quick Installation Guide Configuring Wireless Network This configuration step is available for the Router, Access point, WISP Repeater, and Repeater modes. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network or leave the value suggested by the access point.
  • Page 35 DAP-300P Quick Installation Guide 5. If you want to create an additional wireless network isolated from your LAN, select the Enable guest network checkbox (available for the Router and WISP Repeater modes only). 6. In the Network name field, specify your own name for the guest wireless network or leave the value suggested by the access point.
  • Page 36 DAP-300P Quick Installation Guide Configuring the LAN Port for IPTV/VoIP This configuration step is available for the Router mode. 1. On the IPTV page, select the Is an STB connected to the device checkbox. 2. Select the free LAN port for connecting your set-top box.
  • Page 37 DAP-300P Quick Installation Guide 5. On the VoIP page, select the Is an IP phone connected to the device checkbox. 6. Select the free LAN port for connecting your IP phone. 7. If the VoIP service is provided via a VLAN channel, select the Use VLAN ID checkbox and fill in the VLAN ID field.

  • Page 38: Changing Web-Based Interface Password

    DAP-300P Quick Installation Guide Changing Web-based Interface Password On this page you should change the default administrator password. To do this, enter a new password in the Admin password and Password confirmation fields. You may set any password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other characters available in the US keyboard layout.

  • Page 39: Configuring Local Area Network

    DAP-300P Quick Installation Guide Configuring Local Area Network 1. Go to the Connections Setup / LAN page. 2. If needed, change the IPv4 address of the access point's LAN interface and the mask of the local subnet. To do this, click the IPv4 tab and specify needed values in the IP address and Mask fields in the Local IP Address section.
  • Page 40 DAP-300P Quick Installation Guide IPv4 address assignment. By default, the DHCP server of the device in the access point mode is disabled (the Disable value is selected from the Mode of dynamic address assignment drop-down list on the IPv4 tab). As a rule, the DHCP server should be disabled when the device is used in the access point mode.

  • Page 41: Specifications

    DAP-300P Quick Installation Guide SPECIFICATIONS Hardware · Processor MT7628DAN (580MHz) · 64MB, built in processor · Flash 8MB, SPI · 10/100BASE-TX WAN port with PoE support Interfaces · 10/100BASE-TX LAN port · POWER / WLAN LEDs · INTERNET · ·...
  • Page 42 DAP-300P Quick Installation Guide Software · Support of IEEE 802.1X for Internet connection Network functions · DHCP server/relay · Advanced configuration of built-in DHCP server · Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation · Automatic obtainment of LAN IP address (for access point/repeater/client modes) ·...
  • Page 43 DAP-300P Quick Installation Guide Software · Local remote access settings through Management and monitoring TELNET/WEB (HTTP/HTTPS) · Bilingual web-based interface for configuration and management (Russian/English) · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface ·...
  • Page 44 DAP-300P Quick Installation Guide Wireless Module Parameters · “Client” function (access point mode) Advanced functions Wireless network client Wireless network repeater · “Client” function (router mode) WISP repeater · WMM (Wi-Fi QoS) · Information on connected Wi-Fi clients · Advanced settings ·...
  • Page 45 DAP-300P Quick Installation Guide Wireless Module Parameters · Receiver sensitivity 802.11b (typical at PER = 8% (1000-byte PDUs)) -90dBm at 1Mbps -90dBm at 2Mbps -88dBm at 5.5Mbps -86dBm at 11Mbps · 802.11g (typical at PER < 10% (1000-byte PDUs)) -82dBm at 6Mbps...
  • Page 46 DAP-300P Quick Installation Guide Operating Environment · 48V, 0.5A or 802.3af PoE Power · External DC power adapter 12V/0.5A (not included in the delivery package) · Operating: from 0 to 40 °C Temperature · Storage: from -20 to 65 °C ·...

  • Page 47: Safety Rules And Conditions

    DAP-300P Quick Installation Guide SAFETY RULES AND CONDITIONS Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents.

  • Page 48: Technical Support

    Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e-mail/Internet.

Table of Contents