Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
On
Interval
URL address
Username
Password
Username
Password
Request port
Request path
When you have configured the parameters, click the APPLY button.
Inform Settings
Move the switch to the right so the access point may send reports
(data on the device and network statistics) to the ACS.
Specify the time period (in seconds) between sending reports.
Auto Configuration Server Settings
The URL address of the ACS provided by the ISP.
The username to connect to the ACS.
The password to connect to the ACS.
Connection Request Settings
The username used by the ACS to transfer a connection request to
the access point.
The password used by the ACS.
The port used by the ACS. By default, the port 8999 is specified.
The path used by the ACS.
Page 133 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
