Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
In the opened window, specify the needed parameters:
Parameter
Name
Authentication protocol
Authentication
password
Encryption protocol
Encryption key
MIB subtree
Click the SAVE button.
To edit a user, select the relevant line in the table. In the opened window, change the needed values
and click the SAVE button. Then click the APPLY button.
To remove a user, select the checkbox located to the left of the relevant line in the table and click
the DELETE button (
Specify a username for access from the SNMP manager.
Select a required authentication method from the drop-down list or
leave the None value if authentication is not required.
Specify a password for user authentication from the SNMP manager.
The field is displayed if the MD5 or SHA value is selected from the
Authentication protocol drop-down list.
Select a required encryption method from the drop-down list or
leave the None value if encryption is not required. The list is
displayed if the MD5 or SHA value is selected from the
Authentication protocol drop-down list.
Specify an encryption key for data exchange between the SNMP
agent and SNMP manager. The field is displayed if the DES or AES
value is selected from the Encryption protocol drop-down list.
Specify a MIB element which will be available to the SNMP
manager.
). Then click the APPLY button.
Page 116 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
