Setup; Lan - D-Link DPN-101G User Manual

High speed gpon access device
Hide thumbs Also See for DPN-101G:
Table of Contents

Advertisement

Section 3 - Configuration
Choose LAN. The LAN tab that is displayed contains LAN and LAN IPv6. In LAN page, you can change IP address of the ONU. The default IP address
is 192.168.1.1, which is the private IP address of the ONU.
The following table describes the parameters of this page:
Field
Enter the IP address of LAN interface. It is
recommended to use an address from a block
IP Address
reserved for private use. This address block is
192.168.1.1- 192.168.255.254.
Enter the subnet mask of LAN interface. It is
Subnet Mask
recommended to use the default value.
You can config IPv6 address manually or let it
IPv6 Address Mode
generated automactically. It's recommended to
set as Auto.
IP Version
This is used to set if enable IPv6 address.
After your change please press "Apply Changes" to change.
D-Link DPN-101G User Manual

Setup

LAN

Description
11

Advertisement

Table of Contents
loading

Table of Contents