Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
Option 82 Remote ID
When all needed settings are configured, click the APPLY button.
In the DHCP Options section, you can change default values for some options of DHCP protocol
(IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP
server should send to clients to configure the local network.
To do this, click the ADD button (
In the opened window, you can specify the following parameters:
Parameter
Known DHCP options
Options value
Force
After specifying the needed parameters, click the APPLY button.
To edit the parameters of an option, left-click the relevant line in the table. In the opened window,
change the needed parameters and click the APPLY button.
To remove the value of an option, select the checkbox located to the left of the relevant line in the
table and click the DELETE button (
The value of the Remote ID field of DHCP option 82 in accordance
with RFC3046.
Do not fill in the field unless your ISP or the administrator of the
external DHCP server provided this value.
Figure 65. The section for configuring DHCP options.
).
Figure 66. The window for configuring a DHCP option.
From the drop-down list, select an option which you want to
configure.
Specify the value for the selected option.
Move the switch to the left to let the DHCP server send the selected
option only when the client requests it.
). Then click the APPLY button.
Page 75 of 175
Configuring via Web-based Interface
Description
Description
Advertisement
Table of Contents
