Table of Contents
Advertisement
Intel® Server System M70KLP Family Technical Product Specification
6.4.1
Riser Slot #0 Assembly Bracket Overview
With the Standard system options (No GPU support), all available add-in cards slots of riser card #0 can
accommodate full-height, half-length PCIe add-in cards.
In the GPU enabled system, with its low-profile air duct, riser card #0 supports one (1) GPU add-in card (full-
height, full length, double wide) + one (1) full-height, half-length PCIe add-in card. The riser bracket includes
an attachment brace to accommodate the extra weight typical of a GPU card. The brace prevents the card
from any vertical movement, which can cause possible slot damage while the system is in transit. Different
brace options are available to accommodate the mounting requirements of different GPU cards.
Standard System
Figure 36. Riser Card #0 Brackets – Standard and GPU Support with Brace
6.4.2
Riser Slot #1 Assembly Bracket Overview
The riser card brackets for Riser Slot #1 and the chassis back panels differ between the Standard system
options and the GPU enabled system option.
With the Standard system options (no GPU support), all available add-in cards slots of riser card #1
accommodate half-height, half-length PCIe add-in cards. Using this assembly bracket, all six (6) vertical PCIe
add-in slots on the server board are accessible.
In the GPU enabled system, with its low-profile air duct, riser card #1 supports one (1) GPU add-in card (full-
height, full length, double wide) + one (1) full-height, half-length PCIe add-in card. The riser bracket includes
an attachment brace to accommodate the extra weight typical of a GPU card. The brace prevents the card
from any vertical movement, which can cause possible slot damage while the system is in transit. Different
brace options are available to accommodate the mounting requirements of different GPU cards.
Figure 37. Standard System - Riser Slot #1 Low Profile Bracket
GPU System Option with brace
46
Advertisement
Table of Contents
