Deleting An Array - Adaptec DuraStor 7220SS User Manual

Adaptec Storage Manager Pro for DuraStor User's Guide
– To select more than one disk drive, hold the Ctrl key and click
each drive.
2 Complete your other array changes.
3 Click Reconfigure.
Storage Manager Pro reconfigures the array using your
changes.You can continue using the array while Storage
Manager Pro reconfigures it even though the reconfiguration
may take several hours to complete, depending on the array
type, size of the array, and the I/O load. See Viewing Task
Progress on page 6-4.

Deleting an Array

Caution: Deleting an array permanently deletes all
!
partitions and data from the array, including the file
system and drive letter. The data cannot be recovered, even
by a data recovery service.
When you delete an array, the space on the disk drives that were
part of the array revert to free space, allowing you to use the space
for another array.
To delete an array:
1 In the System Browser window, select the array you want to
delete.
2 Click Delete.
Storage Manager Pro confirms that you want to permanently
delete the selected array.
3 Click Yes.
Storage Manager Pro deletes the array.
Note: If you delete a RAID 1 array, you must click Rescan
after the array has been deleted to display the correct
number of disk drives in the Arrays Panel.
3-8