Table of Contents
Advertisement
Figure 21. Removing a fan
Next steps
1.
Replace the cooling fan
2.
Replace the air
shroud.
Installing a cooling fan
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
4. If installed,
remove the cooling fan
Steps
1. Lower the cooling fan into the fan cage.
2. Press the release tabs on the fan cable connector and connect the cable to the system board.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
26
Installing and removing system components
or
install the cooling fan
blank.
Safety
instructions.
Before working inside your
blank.
system.
Advertisement
Table of Contents
