Table of Contents
Advertisement
3 Installation and Configuration
3.1 Configuration DIP Switches
S5U13705B00C Rev 2.0 PCI Evaluation Board
Rev. 3.1
The S5U13705B00C is designed to support as many platforms as possible. The
S5U13705B00C incorporates a DIP switch and seven jumpers which allow both evaluation
board and S1D13705 LCD controller to be configured for a specified evaluation platform.
The S1D13705 has configuration inputs (CNF[3:0]) and BS# input, which are read on the
rising edge of RESET#. In order to configure the S1D13705 for multiple Host Bus Inter-
faces a six-position DIP switch (SW1) is required. The following figure shows the location
of DIP switch SW1 on the S5U13705B00C.
Figure 3-1: Configuration DIP Switch (SW1) Location
Seiko Epson Corporation
Installation and Configuration
DIP Switch - SW1
7
Advertisement
Table of Contents
