Table of Contents
Advertisement
3 Installation and Configuration
The S5U13A04B00C is designed to support as many platforms as possible. The
S5U13A04B00C incorporates a DIP switch and five jumpers which allow both the evalu-
ation board and the S1D13A04 LCD controller to be configured for a specified evaluation
platform.
3.1 Configuration DIP Switches
The S1D13A04 has configuration inputs (CNF[6:0]) which are read on the rising edge of
RESET#. In order to configure the S1D13A04 for multiple Host Bus Interfaces an eight-
position DIP switch (SW1) is required. The following figure shows the location of DIP
switch SW1 on the S5U13A04B00C.
S5U13A04B00C Rev 1.0 Evaluation Board
Rev. 3.1
All manuals and user guides at all-guides.com
Figure 3-1: Configuration DIP Switch (SW1) Location
Seiko Epson Corporation
Installation and Configuration
DIP Switch - SW1
7
Advertisement
Table of Contents
