Huawei UPS5000-S Series User Manual page 79

UPS5000-S-(50 kVA-300 kVA)
User Manual
●
Step 4 Reinstall the rear panel.
Step 5 Adjust the cabinet position so that the expansion bolt holes are aligned with the
eight holes at the bottom of the cabinet.
Step 6 Secure antiseismic kits to the floor at both the front and rear of the cabinet by
using eight M12 expansion bolts. The positioning is shown in
Issue 11 (2020-12-07)
Figure 3-15 Securing the antiseismic kits to the cabinet (with a marking-off
template)
(Without a marking-off template) use eight M6x20 and four M12 screws.
Figure 3-16 Securing the antiseismic kits to the cabinet (without a marking-
off template)
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure 3-17.
69