UPS5000-S-(50 kVA-300 kVA)
User Manual
●
Step 5 Route the signal cables on the left side of subracks along the left side of the
cabinet and the cables on the right side of subracks along the right side of the
cabinet, and then bind the cables to the cabinet.
Issue 11 (2020-12-07)
Figure 3-47 Top cabling
(1) Mains input terminals (1L1–1L3, N)
(3) Bypass input terminals (2L1–2L3, N)
Single mains
For single mains, the copper bars between the mains and bypass input
terminals do not need to be removed, and bypass input cables do not need to
be connected.
Copyright © Huawei Technologies Co., Ltd.
(2) Battery input terminals (+, –)
(4) Output terminals (U, V, W, N)
3 Installation
91