Creating A Macro; Running A Macro; Adding An Action Item To An Existing Macro - Christie CineLife+ CP4415-RGB User Manual

Command
Set Video Input Channel
Active Trigger Input

Creating a macro

Create a macro to make the projector perform a specific list of actions.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the right pane, select Create New Macro.
3. Type a name for the macro.
The Name field cannot contain spaces.
4. Select the macro type.
5. Select Create.
6. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation or Projector, select the action item.
7. To save the macro, select Save.
8. To test the macro, select Test.

Running a macro

Run a macro to have the projector perform a specific list of actions.
1. In the right toolbar of the touch panel, select Run Macro.
2. Select a macro.

Adding an action item to an existing macro

Add an action item to a macro to have the projector perform an additional action when the macro
runs.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the top right pane, select a macro from the list.
3. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation, Playback, or Projector, select the action item.
4. To save the macro, select Save
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB
020-103073-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Description
Sets the video input channel
Controls eight SKA-3D presets
To use this command, a trigger input must be associated with each of the SKA-3D
presets
.
Automation
69