Deleting A Network Time Protocol Server; Changing The Time Zone; Changing The Time Format - Christie CineLife+ CP4415-RGB User Manual

2. Switch to the NTP Server tab.
3. Select the Time Sync using NTP Server slider.
The color of the slider changes to green to indicate it is active.
4. Select + New NTP Server.
5. Select a local or a public NTP server:
• To use a local NTP server, select Local Server and type the IP address in the IP Address
field.
• To use a public NTP server, select Public Server and complete the Country and Server
fields.
6. To test the connection, select Test.
7. Select Add.

Deleting a network time protocol server

Remove a network time protocol (NTP) server if you do not need to synchronize the time on all
installed projectors in the same region.
1. In the left navigation menu, select Service Setup > Time Setup.
2. Switch to the NTP Server tab.
3. If network time protocol (NTP) time synchronization is not active, select Time Sync using
NTP Server.
The color of the slider changes to green to indicate it is active.
4. In the NTP Server Address list, select an NTP server.
5. Select Delete.
6. At the confirmation dialog, select Delete.

Changing the time zone

Change the time zone settings to make the projector time match the local time zone.
1. In the left navigation menu, select Service Setup > Time Setup.
2. Select the Time Zone tab.
3. In the Region list, select a region.
4. In the Time Zone list, select the time zone.
5. Select Save.

Changing the time format

You can use the 12-hour or 24-hour format to display projector time. The 24-hour format reduces
ambiguity.
1. In the left navigation menu, select Service Setup > Preferences.
2. Select General.
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB
020-103073-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Operating the projector
23