Change of machine type,
The machine type can be changed by
using the buttons to count up or down.
Machine types and variants
Machine type
300/500/750/650 w/o reversing
300/500/750/650 w/reversing
*51 and 71 are specially designed for the Japanese market.
Change of parameters
When the machine type has been select-
ed, push the clock button; parameter no.
01. will come up on the display: After two
seconds a value is shown that can be
changed by means of the count up/down
buttons.
Now press the clock button again; the
next parameter number will come up on
the display.
After two seconds a value is shown that
can be changed by means of the count
up/down buttons, etc....
It is possible to scroll the parameters by
pushing the clock button repeatedly.
Note! Parameter 06. = maximum running time for a manual machine or running per
coin insert on "coin insert 2" (double coin insert). If maximum running time on a man-
ual machine is changed e.g. to 30 minutes, the machine cannot choose to run more
487 18 39 01 - 300/500/750 - GB
Parameter programming
continued
Manual control
of time
10
30
Clock button,
change to next parameter
than the maximum time, i.e. 30 minutes.
Count down
Manual
Coin
RMC
50
11 / 51*
70
31 / 71*
Count down
Parameters 01.-14. are on the following pages
Count up
Central control
panel
12
32
Count up
47