Related Manuals for Electrolux Compass Pro TD6-37LAC
Summary of Contents for Electrolux Compass Pro TD6-37LAC
- Page 1 User manual Tumble dryer TD6–37LAC Compass Pro Type N2... 438917962/EN Original instructions 2022.10.05...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ..........................5 Gas heated tumble dryer ......................7 General safety information......................7 Commercial use only........................7 Symbols............................8 2 Warranty terms and exclusions......................9 3 Operating panel ..........................10 4 Program description .......................... 11 Lagoon programs........................11 General programs........................12 5 Handling ............................13 Load ............................13 How to start the machine ......................14 Additional functions........................15... -
Page 5: Safety Precautions
User manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • The machine is not to be used if industrial chemicals have been used for cleaning. •... - Page 6 User manual • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire.
-
Page 7: Gas Heated Tumble Dryer
User manual 1.1 Gas heated tumble dryer • Before installation, check that the local distribution conditions, nature of gas and pres- sure and the adjustment of the appliance are compatible. • The machine is not to be installed in rooms containing cleaning machines with per- chloroethylene, TRICHLOROETHYLENE or CHLOROFLUOROCONTAINING HY- DROCARBONS as cleaning agents. -
Page 8: Symbols
User manual 1.4 Symbols Caution Caution, hot surface Caution, high voltage Read the instructions before using the machine... -
Page 9: Warranty Terms And Exclusions
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec- tronic format. Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling agents to obtain optimal results and maintain product efficiency over time. -
Page 10: Operating Panel
User manual 3 Operating panel fig.X00727A Display Up- and down arrows that are used to scroll up and down through the menus on the display. Start- and pause button... -
Page 11: Program Description
User manual 4 Program description There are two types of programs, automatic programs and time programs. Automatic programs has moisture detection and will stop when selected dryness is achieved. Time programs has no moisture detection and will stop when the preset or selected time has ended. 4.1 Lagoon programs The following table shows the available programs and a short description of those: Automatic programs... -
Page 12: General Programs
User manual 4.2 General programs The following table shows the available programs and a short description of those: Hidden programs Description COTTON Denim and terry. EXTRA DRY The program will stop when set dryness is achieved. COTTON Cotton and terry. CARE The program will stop when set dryness is achieved. -
Page 13: Handling
User manual 5 Handling 5.1 Load Note! Remove all objects from pockets and make sure there are no metal objects such as screws, pins etc. left. Metal objects might cause damage to the drum. Load the goods into the machine according to recommendations and close the door. Make sure the filter is clean and clean if necessary. -
Page 14: How To Start The Machine
User manual 5.2 How to start the machine Automatic programs Select program with the up- and down arrows. Lagoon programs General programs WOOL COTTON HIGH EXTRA DRY WOOL COTTON MEDIUM CARE SILK COTTON IRON DRY POLY COTTON MILD SYNTHETICS GENTLE CURTAINS SYNTHETICS IRON DRY... -
Page 15: Additional Functions
User manual 5.3 Additional functions There is a menu with additional functions available for selection after start. When pressing the menu will ap- pear on the display. Select from the menu with the up- and down arrows and press to activate. Note! Some of the functions may not be available or active on your machine. -
Page 16: When Program Has Ended
User manual 5.4 When program has ended Note! For the best possible drying result it is important to empty the machine as soon as the program has ended. If the machine is not emptied as soon as the program has ended the drum will rotate in short intervalls in order to keep the goods from being wrinkled. -
Page 17: Error Codes
User manual 6 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 12:11 DRYING ERROR WITH RMC The longest permitted RMC time has been exceeded. -
Page 18: Maintenance
User manual 7 Maintenance 7.1 General It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically performed. Note! Lack of maintenance may deteriorate the performance of the machine and may cause damage to components. -
Page 19: Machines With Residual Moisture Control (Rmc)
User manual Check that the filter is clean and unbroken. Clean or replace if necessary. fig.7239 Remove any lint and dust around the machine. 7.4 Machines with residual moisture control (RMC) At regular basis, wipe off/clean drum and lifters with citric acid (Acidum citricum). If soap/softener residue remains, it is recommended also to use a coarse sponge. -
Page 20: Disposal Information
User manual 8 Disposal information 8.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 24 Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...